Stan's Flow CB7 29" Tubeless Rear Wheel, 148 Boost XDR
| BTI part #: |
SX4247 |
| vendor part #: |
DWF790005 |
| UPC: |
847746062004 |
| size: |
29" |
| front/rear: |
rear (XDR) |
| rim: |
Flow CB7 disc carbon |
| hub: |
M-Pulse IS disc |
| axle/spacing (mm): |
12x148 Boost |
| hole: |
32h |
| spoke: |
DB |
| nipple: |
alloy |
| color: |
black |
| weight: |
941g |
- Flow CB7 disc specific asymmetric carbon clincher rim features Stan's patented Bead Socket Technology (BST) that results in lighter, lower sidewalls for faster accelerations, easier inflation and reliability
- CB7 custom carbon layup allows for radial compliance to soak up speed robbing impacts
- Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension
- RiACT: Radial Impact Absorbing Carbon Technology (RiACT) is three times stiffer than Stan's aluminum rims laterally but absorbs radial impacts to withstand bigger hits and roll faster
- WideRight: Provides the optimal volume without distorting the tread pattern or the side knobs so that they are in the correct position for cornering. Proper tire profiles not only allow for optimal tire performance but also allows the tire to do its secondary job of protecting the rim as well as the tire sidewall
- Stan's M-Pulse hubs feature six pawls equipped with Neodymium magnets engaging every 1.66° with less drag, fully shielded Enduro bearings with custom grease fill for long life and low resistance
- Built with double butted Sapim D-Light spokes (2.0/1.65/2.0) and alloy Sapim double square spoke nipples
- 7075-T6 hub shells and axles for years of high torque use
- Includes tubeless valves and tubeless tape
- Rear wheels with the HG 11sp road FH body require the 1.8mm spacer (included) for use with Shimano/SRAM 8-11sp HG mountain cassettes
- Rear wheels with the XDR driver require the 1.8mm spacer (included) for use with XD cassettes
|
|
|
|
